This is cross-post from my blog: vorillaz.com/nextjs-docker.
Next.js is like the Swiss Army knife for creating React applications. It makes the process smooth, offering outstanding performance and a top-notch developer experience. But, when it comes to deploying an application you've built outside of a major deployment provider, it can get a bit tricky. Managing dependencies, configuring the environment, and making sure everything behaves consistently across different platforms .
Now, here's where Docker comes into play. We're going to wrap up your Next.js application, its environment, and all its dependencies into a small little container. Think of a container as your application running in a stripped-down version of Linux. The brain and hearts of your application t's called a Docker image – the blueprint for your container. The container itself? That's your application running based on that master plan.
To make this magic happen, we use a declarative method through something called a Dockerfile. It's like giving Docker a to-do list. Docker then reads and executes the instructions in this file, building and deploying your application.
Why You Should Containerize Your Next.js App with Docker
There are several reasons why you might want to consider containerizing your Next.js application with Docker. Here's a list of advantages:
Consistent behavior across environments: Docker containers ensure your Next.js app behaves consistently across different platforms and environments.
Easy Deployment and Scaling: Docker enables straightforward deployment and scaling of your Next.js app to multiple instances. This makes it easier to handle traffic spikes and meet high availability requirements.
Portablability: Docker containers are portable and shareable. You can collaborate seamlessly with team members or deploy your app to different environments without manual configuration headaches.
Cost-Effective Infrastructure: Managing your own deployment environment can be cost-effective. Docker allows you to self-host multiple isolated Next.js applications on a single machine or move across different hosting vendors, saving you time and resources.
Streamlined Dependency Management: Bundling all your app's dependencies within a Docker container eliminates the need for manual installation and management on the host environment.
Containerizing Your Next.js App: A Step-by-Step Guide
Install Docker.
First things first, you need to ensure that you have Docker installed on your machine. Once done, run the Docker daemon and ensure that everything works as expected. You can check by running a simple command in your terminal.
❏ ~ docker info
Client:
Version: 24.0.7
Context: orbstack
Debug Mode: false
Plugins:
buildx: Docker Buildx (Docker Inc.)
Version: v0.12.0
Edit the next.config.js File
In order to build your Next.js app as a container, you need to change the configuration of your project.
Next.js can automatically create a standalone folder that copies only the necessary files for a production deployment including all your node_modules.
/** @type {import('next').NextConfig} */
module.exports = {
output: "standalone",
};
Create a .dockerignore file
We need to create a .dockerignore file as we don't want to increase the size of our docker image with unnecessary files tranfered to the container. You can create a .dockerignore file in the root of your project and add the following content:
.dockerignore
# Not needed as we are bundling the whole app
node_modules
# Log files
logs
*.log
npm-debug.log*
pnpm-debug.log*
yarn-debug.log*
yarn-error.log*
.next
.git
Create the Dockerfile
You can now create a Dockerfile that describes how your image gets built. We are going to use the pnpm package manager, but you can also use npm or yarn instead. The Dockerfile will be placed on the root of your project and it will look like this:
FROM node:20-alpine AS base
### Dependencies ###
FROM base AS deps
RUN apk add --no-cache libc6-compat git
# Setup pnpm environment
ENV PNPM_HOME="/pnpm"
ENV PATH="$PNPM_HOME:$PATH"
RUN corepack enable
RUN corepack prepare pnpm@latest --activate
WORKDIR /app
COPY package.json pnpm-lock.yaml ./
RUN pnpm install --frozen-lockfile --prefer-frozen-lockfile
# Builder
FROM base AS builder
RUN corepack enable
RUN corepack prepare pnpm@latest --activate
WORKDIR /app
COPY --from=deps /app/node_modules ./node_modules
COPY . .
RUN pnpm build
### Production image runner ###
FROM base AS runner
# Set NODE_ENV to production
ENV NODE_ENV production
# Disable Next.js telemetry
# Learn more here: https://nextjs.org/telemetry
ENV NEXT_TELEMETRY_DISABLED 1
# Set correct permissions for nextjs user and don't run as root
RUN addgroup nodejs
RUN adduser -SDH nextjs
RUN mkdir .next
RUN chown nextjs:nodejs .next
# Automatically leverage output traces to reduce image size
# https://nextjs.org/docs/advanced-features/output-file-tracing
COPY --from=builder --chown=nextjs:nodejs /app/.next/standalone ./
COPY --from=builder --chown=nextjs:nodejs /app/.next/static ./.next/static
COPY --from=builder --chown=nextjs:nodejs /app/public ./public
USER nextjs
# Exposed port (for orchestrators and dynamic reverse proxies)
EXPOSE 3000
ENV PORT 3000
ENV HOSTNAME "0.0.0.0"
HEALTHCHECK --interval=30s --timeout=30s --start-period=5s --retries=3 CMD [ "wget", "-q0", "http://localhost:3000/health" ]
# Run the nextjs app
CMD ["node", "server.js"]
Let's break this down a bit. We will divide our building process into multiple steps, allowing us to utilize Docker's caching mechanism. Our base image is node:20-alpine, which is relatively small in size. For each step, we will instruct PNPM to cache the module installation.
On the deps step, we will bundle our dependencies. We need to move the package.json and pnpm-lock.yaml lock file into our working directory and install all the project's dependencies. Since Next.js will bundle the production dependencies, we don't need to install devDependencies and the production ones separately.
This building step will significantly speed up our building process, as it is internally cached by the Docker engine. Additionally, pnpm's symlinking strategy and internal caching will install our modules at an extremely fast pace.
Next, we have the building step. Once we switch to our working directory, we will copy our node_modules from the previous step, then we will copy the entire project and run pnpm build. This action will trigger the script defined in our package.json, after which we can proceed to the final step.
The runner step is where we will ultimately create our Docker image. We need to set up a user and a group with limited permissions, as we don't want to run our application as root within our container. Once done, we will copy the /.next/standalone, .next/static, and /public folders from our builder step. Next.js' standalone mode bundles everything into an isolated bundle, so we don't need to worry about copying any other folders. Note that there is also a .next/BUILD_ID file that you can use to differentiate your builds. We also need to set up our NODE_ENV environmental variable to production, as many npm modules heavily rely on this setting.
Finally, we will expose port 3000, as this is the default port Next.js listens to. As an added little extra, we have included a healthcheck, pinging our /health API route. This step will ensure that the container is ready before launching the web server. After that, we will run our server by executing CMD ["node", "server.js"].
Build the image and run the container
If you followed along this tutorial, you are now ready to build your Next.js application.
Head to your terminal and build your image by running:
❏ ~ docker build -t my-nextjs-docker .
Once done, you may try to rerun the building process and obtain the building logs, you will see that all the steps are internally cached and the building process just takes a few seconds.
❏ ~ docker build -t my-nextjs-docker .
[+] Building 2.6s (25/25) FINISHED docker:orbstack
=> [internal] load build definition from Dockerfile 0.0s
=> transferring context: 225B 0.0s
=> [internal] load metadata for docker.io/library/node:20-alpine 2.6s
=> CACHED [runner 1/7] RUN addgroup nodejs 0.0s
=> CACHED [runner 2/7] RUN adduser -SDH nextjs 0.0s
=> CACHED [runner 3/7] RUN mkdir .next
You can also find out the building details about your image by using the docker images command.
❏ ~ docker images my-nextjs-docker
REPOSITORY TAG IMAGE ID CREATED SIZE
--
my-nextjs-docker latest 09462a81711b 14 hours ago 155MB
Now it's time to finally start our container, we need to bind port 3000 to our container and spin up the image.
❏ ~ docker run -p 3000:3000 my-nextjs-docker
The output in your terminal will show you that the application is running.
❏ ~ docker run -p 3000:3000 my-nextjs-docker
▲ Next.js 14.0.4
- Local: http://localhost:3000
- Network: http://0.0.0.0:3000
✓ Ready in 39ms
You can now head over to http://localhost:3000 and you will get prompted by the Next.js default homepage.
Envinromental Variables
Next.js offers a reliable way for managing environmental variables through .env files. You can create separate .env files, and the suffix determines the setup environment. Keep in mind that the deployment environment is not actually bound to the NODE_ENV environmental variable. Even when running our container into the staging the NODE_ENV variable is set to production.
So, first things first, we need to create three sample files, one for each deployment envinronment (dev, staging, production).
❏ ~ touch .env.local.sample .env.production.sample .env.staging.sample
You can now add a variable inside each file.
MY_ENV=This is my production envinronment variable
And display that value in your Next.js landing page:
export default function Home() {
return (
<div className={styles.description}>
<div>Coming from `.env`: {process.env.MY_ENV}</div>
</div>
);
}
Then we need to copy the sample .env files into our image. To achieve this, we will pass the building environment as an argument through the build command, so we need to modify our Dockerfile accordingly.
For the first step, let's declare an argument called SETUP_ENVINROMENT. This argument is set to production by default.
FROM node:20-alpine AS base
ARG SETUP_ENVINROMENT=production
Then for the builder step we will use the SETUP_ARGUMENT, copy and rename the appropriate .env file.
FROM base AS builder
RUN corepack enable
RUN corepack prepare pnpm@latest --activate
WORKDIR /app
# Copy the .env{SETUP_ENVINROMENT} file to the container
# This will copy the .env.production.sample -> .env file if the SETUP_ENVINROMENT is production
COPY .env.$SETUP_ENVINROMENT.sample .env
You can try to build separate images for each deployment envinroment, try to also change the MY_ENV variable and rerun each container.
❏ ~ echo Building staging env
❏ ~ docker build --build-arg SETUP_ENVINROMENT=staging --tag my-app-docker-staging .
Create a CI/CD Pipeline
The process of creating and deploying a Docker image is referred to as a pipeline. A pipeline is a sequence of steps that are executed one after the other to build and deploy your application. You can use a CI/CD tool to automate this process and simplify your deployment management.
There are several CI/CD tools available for automating Docker deployments, such as Jenkins, CircleCI, and Travis CI. In this tutorial, we will utilize GitHub Actions to automate our Docker deployments.
Create the Release Workflow
GitHub Actions is a CI/CD tool that enables you to automate your software development workflows. It offers a collection of predefined workflows that you can use to streamline your deployments and it's almost free for hobby and open source projects.
In order to design a custom workflow for our project, we need to create a YAML file within our repository. This file contains the steps that will be executed to build and deploy our project.
In order to publish our image on Docker Hub as a publicly accessible image, we need to generate a token in Docker Hub. You can create a token by navigating to your Docker Hub account and then to Account Settings -> Security -> New Access Token. You can label your token and grant it with read and write permissions.
Next, add the token to your GitHub repository as a secret accessible to GitHub actions. You can do so by visiting your repository and then heading to Settings -> Secrets and Variables -> Actions. Add two new repository secrets named DOCKER_USER and DOCKERHUB_TOKEN, and set their values to your Docker username and the token you just created.
Once completed, you can proceed to your GitHub repository and create a new file in the .github/workflows directory. You can name the file release.yml and insert the following content:
name: Build and Publish Docker image
on:
push:
branches: [main]
jobs:
docker:
runs-on: ubuntu-latest
steps:
- name: Checkout Code
uses: actions/checkout@v3.5.3
- name: Set up Docker Buildx
uses: docker/setup-buildx-action@v2.9.1
- name: Login to DockerHub
uses: docker/login-action@v2.2.0
with:
username: ${{ vars.DOCKER_USER }}
password: ${{ secrets.DOCKERHUB_TOKEN }}
- name: Docker Hub Description
uses: peter-evans/dockerhub-description@v3
with:
username: ${{ vars.DOCKER_USER }}
password: ${{ secrets.DOCKERHUB_TOKEN }}
repository: ${{ vars.DOCKER_USER }}/my-nextjs-docker
readme-filepath: ./README.md
- name: Build and push
uses: docker/build-push-action@v4.1.1
with:
context: .
file: ./Dockerfile
push: true
tags: ${{ vars.DOCKER_USER }}/my-nextjs-docker:latest
platforms: linux/amd64,linux/arm64/v8
The configuration might initially appear somewhat complex, but let's break it down into smaller components.
First, we need to define the triggering actions for our workflow. In our case, we want to initiate the workflow upon every push to the main branch. Next, we need to define the jobs that will be executed.
We also have a single job called docker that will run on the most recent version of Ubuntu. The job consists of a single step that checks out the code, followed by the setup of the Docker Buildx plugin. Buildx is a Docker CLI plugin that extends the docker command with the complete support of the features provided by the Moby BuildKit builder toolkit.
Aftewards, we need to log in to Docker Hub using the docker/login-action action. Then, we need to set up the description of our Docker image using the peter-evans/dockerhub-description action. Finally, we need to build and push our image using the docker/build-push-action action and we are basically done.
Wrapping Up
In this tutorial, we explored how to containerize a Next.js application using Docker. We also delved into automating our Docker deployments using GitHub Actions. We hope that this tutorial will serve as a helpful introduction to Docker and Next.js. If you have any questions or suggestions, please do not hesitate to get in touch. Additionally, you may want to check out the complete example of this tutorial.